Jiana Zhilian · Dongguan · Guangdong · China
Custom wire harness and cable assembly manufacturer
Since 2013, in Dongguan, China. Cutting, crimping, injection molding, overmolding and 100% electrical test run under one roof — from a two-wire terminal lead to a 1500 V DC charging inlet. Nothing is subcontracted between process steps.
- IATF 16949
- ISO 9001
- 100% electrical test
- MOQ 500 pcs
- 1,500 m²
- Plant area
- 200+
- Employees
- 30,000+
- Pcs per day
- 13 yrs
- Since 2013
What we make
Every family below runs to your drawing rather than to a fixed catalog. Connector, wire gauge, length and sleeving are yours to specify — and the families we have tooled for are only the starting point.
-
New Energy Harness Battery pack, BMS sensing and charging-port assemblies for EVs, e-bikes, energy storage and power tools. View family -
Adapter Cables Connector-to-connector conversions: MC4, XT60/XT90, EC5, SAE, Anderson, DC5525 and cigarette-plug leads. View family -
High-Current Connectors LCB30/40/50 latched two-pin connectors and MR30/MT60 three-phase plugs, supplied as leads or loose parts. View family -
Terminal Wire Harnesses Wire-to-board and wire-to-wire terminal leads: single and dual row, SMT and through-hole, IDC, friction lock, fork hold-down and box header shells — supplied crimped to length or as loose parts. View family -
Power Distribution Panel, cabinet and busbar harnesses for telecom towers, switchgear and distribution cabinets. View family -
Industrial Control M8/M12/M16 waterproof sockets, aviation plugs and motion-control leads for automation and machine tools. View family -
Consumer Electronics Board-to-board, HDD power and terminal leads for PC, appliance and 3C assembly lines. View family -
Medical Equipment Low-noise, high-flexibility harnesses and disposable patient leads for diagnostic and monitoring equipment. View family -
QS High-Current Series Anti-spark high-current connectors from 15 A to 360 A, in bullet, latched and panel-mount bodies for packs, storage, robotics and UAV power. View family
Released part numbers
Standard assemblies kept in tooling and ready to run. Any of them can be re-terminated, re-gauged or re-sleeved to your specification.
Eight processes, all in-house
Wire enters one door and leaves as a tested assembly. No subcontracting between cutting, crimping, molding and test — which is why a drawing revision reaches the line the same week.
- Cut to length ±1 mm
- Crimp force monitored
- Overmold in-house
- 100% continuity test
- 01
Wire cutting
Automatic cut-and-strip, 0.5–6 mm², ±1 mm tolerance.
- 02
Crimping
Semi-auto presses with in-line crimp-force monitoring.
- 03
Injection molding
In-house molds for overmolded strain reliefs and housings.
- 04
Overmolding
TPE / PVC overmolding for IP-rated cable exits.
- 05
Assembly
Manual harness build to drawing, with jig-board routing.
- 06
Automated production
Rotary terminal machines for high-volume discrete leads.
- 07
Harness line
Parallel lines for multi-branch assemblies and sleeving.
- 08
Electrical test
100% continuity, with hipot and resistance test on request.
- ✓IATF 16949
- ✓ISO 9001
- ✓RoHS
- ✓REACH
Quality is checked in process, not at the end
Four control points sit between incoming material and the export carton. Each one is recorded against the work order, so a claim can be traced back to the batch that made it.
- 01
Incoming material
Wire, terminals and housings checked against drawing and certificate of conformance before release to production.
- 02
Crimp monitoring
Crimp height and pull-force sampled per batch, recorded against the work order.
- 03
Electrical test
100% continuity on every assembly; hipot and contact-resistance test for high-current parts.
- 04
Final inspection
AQL sampling on appearance, dimensions and labeling before export packing.
Eight areas, photographed on site
Not renders and not stock photography — the cutting, crimping, molding and assembly benches that will run your order.
-
01 Cut & strip -
02 Crimping -
03 Injection molding -
04 Overmolding -
05 Assembly -
06 Automated lines -
07 Harness line -
08 Production floor
Ten steps from inquiry to after-sales
Quotation within 24 hours of receiving a drawing. Sample in 3–5 working days. Production in 15–20 working days after approval.
- 01
Inquiry
Send drawing, sample or a photo with dimensions.
- 02
DFM review
We confirm feasibility and quote within 24 h.
- 03
Sample
Prototype built and shipped for approval.
- 04
PO & deposit
Order released after deposit.
- 05
Material
Wire, terminals and housings prepared and inspected.
- 06
Cut & crimp
Wire cut, stripped and crimped to drawing.
- 07
Assembly
Harness built, sleeved and labelled.
- 08
Test
100% continuity, plus hipot on request.
- 09
Packing
AQL inspection, export cartons, palletizing.
- 10
Shipping
EXW / FOB / DDP, with after-sales follow-up.
Questions buyers ask
The 8 answers that most often hold up a first order. Anything not covered here, ask directly — we reply within one working day.
01 What is your minimum order quantity?
MOQ is 500 pcs per part number for standard assemblies, and 100 pcs for prototypes and samples. Mixed part numbers in one shipment are accepted.
02 How long does a sample take?
3–5 working days for simple leads once the drawing is confirmed, and 7–10 working days where a new mold or overmold tool is required.
03 What is the production lead time?
15–20 working days after drawing approval and deposit. Repeat orders usually ship in 10–15 working days.
04 What are your payment terms?
30% deposit with the balance against the copy of the bill of lading. T/T, and L/C at sight for orders above USD 30,000.
05 Which certifications do you hold?
IATF 16949 and ISO 9001 for process control. Materials are supplied with RoHS and REACH declarations; UL-listed wire is available on request.
06 Will you sign an NDA for our drawings?
Yes. We sign a mutual NDA before receiving drawings, and tooling and drawings remain the customer’s property.
07 Can you match a sample we already have?
Yes. Send the sample or clear photos with dimensions and we will reverse engineer it, then send drawings for your approval before production.
08 What shipping terms do you offer?
EXW, FOB Shenzhen / Yantian, and DDP to most destinations. Express courier for samples.
Send us the drawing.
A PDF, a DXF, a photo with dimensions, or the sample itself — any of them is enough for us to quote. We sign an NDA before drawings change hands, and we reply within one working day.
- Quote in 24 h
- Sample in 3–5 days
- NDA on request
- Telephone
- +86 135 0981 0386
- WhatsApp / WeChat
- +8613509810386 · 55886868
- Working hours
- Mon–Sat 08:30–18:00 (GMT+8)